Portable Blood Analyzer-Photometric

AD5398

AD5398: 120 mA, Current Sinking, 10-Bit, I²C D/A Converter

The AD5398 is a single 10-bit DAC with 120 mA output current sink capability. It features an internal reference and operates from a single 2.7 V to 5.5 V supply. The DAC is controlled via a 2-wire ... More

Data Sheet Rev B, 12/2005 (pdf 434kB)

120 mA, Current Sinking, 10-Bit, I²C D/A Converter

ADuM4160

ADUM4160: Full/Low Speed USB Isolator

The ADuM4160 is a USB-port isolator, based on Analog Devices, Inc. iCoupler^® technology. Combining high speed CMOS and monolithic air core transformer ... More

Data Sheet Rev PrF, 05 (pdf 397kB)

Full/Low Speed USB Isolator

AD5324

AD5324: 2.5 V to 5.5 V, 500 µA Quad Voltage Output 12-Bit DAC in 10-Lead Packages

The AD5304/AD5314/AD5324* are quad 8-, 10-, and 12-bit buffered voltage output DACs in 10-lead MSOP and 10-lead LFCSP packages that operate from a single 2.5 V to 5.5 V supply, consuming ... More

Data Sheet Rev F, 09/2006 (pdf 529kB)

2.5 V to 5.5 V, 500 µA Quad Voltage Output 12-Bit DAC

ADUC7060

ADUC7060: Low-Power, Precision Analog Microcontroller, Dual Σ-Δ ADCs, Flash/EE, ARM7TDMI

The ADuC7060/ADuC7061 are fully integrated, 8 kSPS, 24-bit data acquisition systems incorporating high performance multi-channel sigma-delta (Σ-Δ) analog-to-digital converters (ADCs), 16-bit/ 32-bit ...More

Data Sheet Rev 0, 05/2009 (pdf 1520kB)

Low-Power, Precision Analog Microcontroller, Dual Σ-Δ ADCs, Flash/EE, ARM7TDMI

AD7682

AD7682: 16-Bit, 4-Channel, 250 kSPS PulSAR^® ADC

The AD7682/AD7689 are 4-channel/8-channel, 16-bit, charge redistribution successive approximation register (SAR) analog-to-digital converters (ADCs) that operate from a single power supply, ...More

Data Sheet Rev A, 03/2009 (pdf 2507kB)

16-Bit, 250 kSPS PulSAR^® ADC

AD7147A

AD7147A:  CapTouch^® Programmable Controller for Single-Electrode Capacitance Sensors

The AD7147A CapTouch^® controller is designed for use with capacitance sensors implementing functions such as buttons, scroll bars, and wheels. The sensors need only one PCB layer, enabling ...More

Data Sheet Rev A, 03/2009 (pdf 1352kB)

CapTouch^® Programmable Touch Controller for Single-Electrode Capacitance Sensors

ADI defines innovation and excellence in signal processing. Our breakthrough technologies enable and accelerate next-generation healthcare designs.

iCoupler^® Digital Isolation

A transformer-based approach to isolation that combines the advantages of optocoupler, transformer, and semiconductor technologies.

128 Channel, 24-bit Current-to-Digital ADC for High Slice Count CT Scanners

The ADAS1128 lowers CT system cost and enables enhanced imaging using the industry's highest level of channel integration and speed

Octal LNA/VGA/AAF/ADC and Crosspoint Switch Family

The AD927x offers a complete 8-channel ultrasound receiver on a single chip.

CapTouch^® Capacitance-to-Digital Converters (CDC)

Enables accurate measurement and improved responsiveness for user interface controls including touch pads and scroll wheels.

Impedance-to-Digital Converter (IDC)

A fully integrated impedance-to-converter system on a single chip.

iMems^® and iSensor^® Inertial Motion Sensors

MEMS inertial sensing components and intelligent integrated inertial measurement units (IMUs) for motion detection and measurement.

ADI offers innovative ICs for Portable Blood Analyzer-Photometric functional blocks.

• LED Driver
  • Integrated Solution
    • Programmable Current Drive/Sink
  • Discrete Solution
    • 12-bit DAC
    • Control Amplifiers
    • Low Power Voltage References

• Photodiode Receiver
  • Low Input Bias Current Buffer
• Switches/Multiplexers
• 16-Bit, 250 kSPS PulSAR^® ADC
• Integrated ADC and MUX
• Processor
  • Blackfin^® Processor
  • Analog Microcontroller
• USB Isolator
• ISM Transceiver for Wireless Communication
• Supervisory Circuit
• Precision Digital Temp Sensors
• User Interface (CapTouch^® Programmable Controllers)
• LED Backlight Driver
• Battery Power Management Matrix

• Medical Devices Get A Prescription For Wafer-Level Chip-Scale Packaging, Electronic Design, 7/23/09
• Overview: Capacitance-to-Digital Converter Technology
• Overview: iCoupler^® Technology
• Design Tool: ADI ADuC7xxx Microconverters Eval System
• Third Party Developer List: ADuC7xxx Microcontrollers

• Software Code Examples for ADuC702x Analog Microcontrollers
• Interactive Design Tools: Isolator: iCoupler^® Current Consumption Calculator
• Apps Note: AN-895 ADuC702x MicroConverter I²C-Compatible Interface (pdf 237kb)
• Apps Note: AN-913: Isolating I²C Interfaces (pdf 280kb)
• Apps Note (AN-925): Sensors for the AD7147 and AD7148 CapTouch Controllers (pdf 189kb)
• Apps Note (AN-929): Tuning the AD714x for CapTouch Applications (pdf 618kb)
• Apps Note (AN-957): Layout Guidelines for the AD7147 and AD7148 CapTouch^® Controllers (pdf 337kb)
• FAQ: Isolation iCoupler^® Technology
• Advertorial: Providing an Edge in Capacitive Sensor Applications (pdf 85.6kb)
• Brochure: Precision Analog Microcontrollers (pdf 6.38mb)
• Brochure: RF Tranceivers for Short Range Devices (pdf 2.75mb)
• Subscribe to New Analog Microcontroller Product Feed: